Home > Products > Hoists > Rope Electric Hoist > KCD-1T--KCD-10T
Rope Electric Hoist  

KCD-1T--KCD-10T

Rope Electric Hoist

Approved:
 User Manual.PDF    Category Download.PDF
Features
KCD series electric hoist is an improvement electric hoist that is can completely resolved the problem of that the electric hoist reaches the up limited position,guide rope device is embrittlem cracking,the wire rope is disorder,the reducer is losing oil,the frequent trouble about electric and so on.

Adopting heavy punch to limited the position ,it has simple structure ,reliable movement which can prevent the phenomenon of the electric hoist reaches the limited position that caused by the chock block in gag lever post to side down the unreliable movement of the spark out limited position and so many factors

TO prevent the disorder of the guide rope device, also can prevent the phenomenon of the wire rope wind misorder that appeared in the process of going up and going down. It can make sure that under the circumstance lack of hanger hook acting force, the wire rope can pass through the hole in the rope device regularly, The guide rope nut use whole to bisection structure , the spring can adjust the degree of tightness automatically, it is endurable
Technique Parameter
Model
KCD-1T--KCD-10T
Weight (t)
0.5
1
Lifting height (m)
6
9
12
6
9
12
18
24
30
Lifting normal speed (slow speed)(m/pm)
8 (0.8)
Running speed (m/pm)
20 (30)
Wire rope
Diameter of the rope (mm)
4.8
7.4
Diameter of the line (mm)
0.22
0.34
Structural style
D-6 x37+1
I-beam track modle (GB706-65)(m)
16~28B
The minimum radius of O ring track (m)
1.5
1.5
2
3
4
Lifting
Electric
motor
Model
ZDI21~4 (ZDSI0.2/0.28)
ZDI22~4 (ZDSI0.2/1.5)
Capacity (k/w)
0.8 (0.2/0.8)
1.5 (0.2/1.5)
Rotating speed (r/m)
1380
Phase
3
Voltage (V)
380
Current (A)
2.4 (0.72/2.4)
4.3 (0.72/4.3)
Frequency (c/s)
50
Running electric
motor
Model
ZDYI11~4
ZDYI11~4
Capacity (k/w)
0.2
Rotating speed (r/s)
1380
Phase
3
Voltage (V)
380
Current (A)
0.72
0.72
Frequency(c/s)
50
Connection times (t/ph)
120
Working rate (JC%)
25%

 
Model
KKCD-1T--KCD-10T
Weight (t)
5
10
Lifting height (m)
6
9
12
18
24
30
6
9
12
18
24
30
Lifting speed normal speed (slow speed)(m/pm)
8 (0.8)
Running speed (m/pm)
20 (30)
Wire rope
Diameter of the rope (mm)
15
Diameter of the line (mm)
0.7
Structural style
D-6 x37+1
I-beam track modle (GB706-65)
25A~63C
The minimum radius of O ring track (m)
2.5
3
4
5
2.5
3.5
4
6
7.5
9
Lifting
Electric
motor
Model
ZDI41~4 (ZDSI0.8/7.5)
ZDI51~4 (ZDSI1.5/13)
Capacity (k/w)
7.5 (0.8/7.5)
13 (1.5/13)
Rotating speed (r/m)
1400
Phase
3
Voltage (V)
380
Current (A)
18 (2.42/18)
30 (4.3/30)
Frequency (c/s)
50
Running electric
motor
Model
ZDYI21~4
Capacity (k/w)
0.8
0.8 x 2
Rotating speed (r/s)
1380
Phase
3
Voltage (V)
380
Current (A)
2.4
2.4 x 2
Frequency(c/s)
50
Connection times (t/ph)
120
Working rate (JC%)
25%

Copyright (C) 2012 Zhejiang Kaixun Mechanical And Electrical Co.,Ltd.  Design by:junet